TeleFlow Forums http://teleflow.org/phpbb/ |
|
Testing Application without simulator http://teleflow.org/phpbb/viewtopic.php?f=1&t=568 |
Page 1 of 1 |
Author: | hmarani [ Tue Feb 10, 2009 9:39 am ] |
Post subject: | Testing Application without simulator |
Hello, My application works using simulator but it does not work using telephone (D4pciufw dialogic) just rings, here are the information: Teleflow server started Automatic Teleflow time service started Automatic Vt server started Automatic VtAdmin server started Automatic ----------------------------------- line list: inbound01 c:\documents settings\...\myfirstapplication.tap lp0 ............2 .......................................................... ... ............3 .......................................................... ... ............4 .......................................................... ... and it is saved under myfirstapplication.tal in the same directory Tf congig: Dialogic Application: c:\documents settings\...\myfirstapplication.tal automatic started checked Teleflow Monitor: blinks: inbound01 5265 myfirstapplication.main 8 wait for call inbound02 5265 .............................. 10 wait ........................................................................ ........................................................................ green Application running normally after restarting Appication terminated abnormally This is my first application, your help is highly appreciated. Thanks |
Author: | Chris [ Wed Feb 11, 2009 10:11 am ] |
Post subject: | Re: Testing Application without simulator |
At the end of the issues you listed, you said: Quote: green Application running normally after restarting Appication terminated abnormally Are you saying that when you start TeleFlow, and view things in TeleFlow Monitor, everything is green, but at some point after this (perhaps after you call), everything turns red? If so, you should check the logs. Look in TeleFlow Config for the log directory, then look at the line logs for any line that has terminated abnormally to see what is amiss. |
Author: | hmarani [ Wed Feb 11, 2009 2:11 pm ] |
Post subject: | Re: Testing Application without simulator |
Chris, The four buttons changes from light brown to brown; the solid green little bar is at the bottom. Thanks |
Author: | Chris [ Thu Feb 12, 2009 10:12 am ] |
Post subject: | Re: Testing Application without simulator |
If the lights are changing colours, there are application errors. Check the logs. Look in TeleFlow Config for the log directory, then look at the line logs for any line that has terminated abnormally - it sounds like they all do, so any line log will do - to see what is amiss. |
Author: | hmarani [ Thu Feb 12, 2009 2:59 pm ] |
Post subject: | Re: Testing Application without simulator |
Chris, This is my first application and sorry if my questions sound abnormal; however the line shows this error: ERROR: Port 1 specified exceeds maximum ports (0) 2009/02/09 20:29:28.890: FATAL 2009/02/09 20:29:28.890: Attempting to jump to Fatal Error Global Event label: '' 2009/02/09 20:29:28.890: Fatal label undefined! Thanks |
Author: | Chris [ Fri Feb 13, 2009 10:27 am ] |
Post subject: | Re: Testing Application without simulator |
In the future, it might help if you clip a little more of the log. In this case, I happen to know where this is happening. For other errors, knowing the step the error is coming from is VERY important. In this particular case, I'm guessing the step is Wait for Call, and it sounds like the Dialogic board/service isn't started. Go to:
* Click the board listed. It will likely have a red square on it, indicating it hasn't been started. * Click the green arrow button to start the board. * You might also want to ensure it will always start with Windows, so go to "Settings >> System/Device autostart >> Start system" Once the Dialogic service is running, try starting TeleFlow Server again and see if the results change. |
Author: | hmarani [ Sun Feb 15, 2009 10:45 am ] |
Post subject: | Re: Testing Application without simulator |
Hi, You were correct about the card, it was not started; but is started now. However, the application is doing the same works with stimulator only. Here are logs: inbound011: 2009/02/15 11:38:24.937: Initialization done 2009/02/15 11:38:24.937: ==>MyMain 2009/02/15 11:38:24.937: [1] START 2009/02/15 11:38:24.937: [3] Global Event 2009/02/15 11:38:24.937: Label is 'APPLICATION_ERROR' 2009/02/15 11:38:24.937: Setting system variable '@FATAL' to 'APPLICATION_ERROR' 2009/02/15 11:38:24.937: [4] Global Event 2009/02/15 11:38:24.937: Label is 'CALLER_GONE' 2009/02/15 11:38:24.937: Setting system variable '@HANGUP' to 'CALLER_GONE' 2009/02/15 11:38:24.937: [248] Wait for Call 2009/02/15 11:38:24.937: TIMEOUT is '' 2009/02/15 11:38:24.937: Empty TIMEOUT defaults to none 2009/02/15 11:38:24.937: Rings is '2' 2009/02/15 11:38:24.937: Connection Delay is '500' 2009/02/15 11:38:26.437: Wait for 2 rings and then pickup 2009/02/15 11:38:26.437: ERROR: Port 1 specified exceeds maximum ports (0) 2009/02/15 11:38:26.437: FATAL 2009/02/15 11:38:26.437: Attempting to jump to Fatal Error Global Event label: 'APPLICATION_ERROR' 2009/02/15 11:38:26.437: Setting system variable '@FATAL' to '' 2009/02/15 11:38:26.437: [5] Label 2009/02/15 11:38:26.437: Label: APPLICATION_ERROR 2009/02/15 11:38:26.437: [6] Hang Up 2009/02/15 11:38:26.437: [248] Wait for Call 2009/02/15 11:38:26.437: TIMEOUT is '' 2009/02/15 11:38:26.437: Empty TIMEOUT defaults to none 2009/02/15 11:38:26.437: Rings is '2' 2009/02/15 11:38:26.437: Connection Delay is '500' 2009/02/15 11:38:27.937: Wait for 2 rings and then pickup 2009/02/15 11:38:27.937: ERROR: Port 1 specified exceeds maximum ports (0) 2009/02/15 11:38:27.937: FATAL 2009/02/15 11:38:27.937: Attempting to jump to Fatal Error Global Event label: '' 2009/02/15 11:38:27.937: Fatal label undefined! 2009/02/15 11:38:30.937: 2009/02/15 11:38:30.937: Application restart 65 2009/02/15 11:38:30.937: Setting system variable '@SYSDRIVE' to 'C:' 2009/02/15 11:38:30.937: Setting system variable '@SYSDIR' to '\Documents and Settings\user1\Application Data\TeleFlow\Applications' 2009/02/15 11:38:30.937: Setting system variable '@P1' to '' 2009/02/15 11:38:30.937: Setting system variable '@P2' to '' 2009/02/15 11:38:30.937: Setting system variable '@P3' to '' 2009/02/15 11:38:30.937: Setting system variable '@P4' to '' 2009/02/15 11:38:30.937: Setting system variable '@P5' to '' 2009/02/15 11:38:30.937: Setting system variable '@P6' to '' 2009/02/15 11:38:30.937: Setting system variable '@P7' to '' 2009/02/15 11:38:30.937: Setting system variable '@P8' to '' 2009/02/15 11:38:30.937: Setting system variable '@P9' to '' 2009/02/15 11:38:30.937: Setting system variable '@PROMPT' to 'C:\Program Files\TeleFlow\Languages\English' 2009/02/15 11:38:30.937: Setting global variable '@VOLUME' to '0' 2009/02/15 11:38:30.937: Setting global variable '@TIMEOUT' to '3000' 2009/02/15 11:38:30.937: Setting system variable '@FAXQPTR' to '' 2009/02/15 11:38:30.937: Setting system variable '@PORT' to '1' 2009/02/15 11:38:30.937: Setting system variable '@CALL_LINE' to '' 2009/02/15 11:38:30.937: Setting system variable '@SPELLTONES' to '' 2009/02/15 11:38:30.937: Setting system variable '@RECORD_RESULT' to '' 2009/02/15 11:38:30.937: Setting global variable '@SYS_DATA' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_SOH' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_STX' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_ETX' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_EOT' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_ENQ' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_ACK' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_BEL' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_BS' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_TAB' to ' ' 2009/02/15 11:38:30.937: Setting system variable '@TAB' to ' ' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_LF' to ' ' 2009/02/15 11:38:30.937: Setting system variable '@LINEFEED' to ' ' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_VT' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_FF' to '' 2009/02/15 11:38:30.937: Setting system variable '@FORMFEED' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_CR' to ' ' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_SO' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_SI' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_DLE' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_DC1' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_DC2' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_DC3' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_DC4' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_NAK' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_SYN' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_ETB' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_CAN' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_EM' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_SUB' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_ESC' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_FS' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_GS' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_RS' to '' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_US' to '' 2009/02/15 11:38:30.937: Setting system variable '@SPACE' to ' ' 2009/02/15 11:38:30.937: Setting system variable '@CHAR_DEL' to '' 2009/02/15 11:38:30.937: Setting system variable '@HANGUP' to '' 2009/02/15 11:38:30.937: Setting system variable '@FATAL' to '' 2009/02/15 11:38:30.937: Setting system variable '@CALL_SEIZED' to '' 2009/02/15 11:38:30.937: Setting system variable '@CALL_START' to '' 2009/02/15 11:38:30.937: Setting system variable '@CALL_END' to '' 2009/02/15 11:38:30.937: Setting system variable '@CALL_ELAPSE' to '' 2009/02/15 11:38:30.937: Setting system variable '@WEEKDAY' to '' 2009/02/15 11:38:30.937: Setting system variable '@DATE' to '' 2009/02/15 11:38:30.937: Setting system variable '@TIME' to '' 2009/02/15 11:38:30.937: Setting system variable '@UNIX_TIME' to '' 2009/02/15 11:38:30.937: Setting system variable '@HOOK_STATUS' to '' 2009/02/15 11:38:30.937: Setting system variable '@APPID' to '1001' 2009/02/15 11:38:30.937: Setting system variable '@CALLOUT_RESULT' to '' 2009/02/15 11:38:30.937: Setting system variable '@CALLOUT_REASON' to '' 2009/02/15 11:38:30.937: Setting system variable '@TRUNK_TYPE' to '' 2009/02/15 11:38:30.937: Setting system variable '@SYS_CALLREF' to '' 2009/02/15 11:38:30.937: Initializing... 2009/02/15 11:38:30.937: Initialization done 2009/02/15 11:38:30.937: ==>MyMain 2009/02/15 11:38:30.937: [1] START 2009/02/15 11:38:30.937: [3] Global Event 2009/02/15 11:38:30.937: Label is 'APPLICATION_ERROR' 2009/02/15 11:38:30.937: Setting system variable '@FATAL' to 'APPLICATION_ERROR' 2009/02/15 11:38:30.937: [4] Global Event 2009/02/15 11:38:30.937: Label is 'CALLER_GONE' 2009/02/15 11:38:30.937: Setting system variable '@HANGUP' to 'CALLER_GONE' and here is Tfserverlog: Engenic TeleFlow: Build 2008.6.26 (c) 1994 - 2008 Engenic All rights reserved. 2009/02/15 10:34:32.765: Dynamically loading board DLL at run-time. 2009/02/15 10:34:32.765: LoadBoardFunctions: Start 2009/02/15 10:34:32.781: LoadBoardFunctions: Success. 2009/02/15 10:34:32.781: Board DLL: C:\Program Files\TeleFlow\brd_simulator.dll 2009/02/15 10:34:32.812: Creating application manager Engenic TeleFlow: Build 2008.6.26 (c) 1994 - 2008 Engenic All rights reserved. 2009/02/15 10:38:19.953: Service shutdown requested. 2009/02/15 10:38:19.953: **** SERVICE SHUTTING DOWN!!! **** 2009/02/15 10:38:20.031: Closing handles... 2009/02/15 10:38:20.031: Unloading board dll... 2009/02/15 10:38:20.046: **** Service terminated. **** Engenic TeleFlow: Build 2008.6.26 (c) 1994 - 2008 Engenic All rights reserved. 2009/02/15 10:38:24.578: Checking Windows up-time. 2009/02/15 10:38:24.578: Windows up-time: 174357265 ms 2009/02/15 10:38:24.578: Windows has been running for at least 4 minutes 2009/02/15 10:38:24.578: TFSTART = 20090215103824 2009/02/15 10:38:24.578: Dynamically loading board DLL at run-time. 2009/02/15 10:38:24.578: LoadBoardFunctions: Start 2009/02/15 10:38:24.593: LoadBoardFunctions: Success. 2009/02/15 10:38:24.593: Board DLL: C:\Program Files\TeleFlow\brd_dialogic.dll 2009/02/15 10:38:24.593: Starting Monitor thread... 2009/02/15 10:38:24.609: Creating application manager 2009/02/15 10:38:24.609: Loading .TAL file into application list structure. 2009/02/15 10:38:24.609: WARNING: Failed to find TFKEY key in registry 2009/02/15 10:38:24.609: Running in evaluation mode 2009/02/15 10:38:24.609: This is an unlicensed or evaluation version of Teleflow. 2009/02/15 10:38:24.609: Port 1 is an unlicensed port 2009/02/15 10:38:24.609: Port 2 is an unlicensed port 2009/02/15 10:38:24.609: Port 3 is an unlicensed port 2009/02/15 10:38:24.609: Port 4 is an unlicensed port 2009/02/15 10:38:27.062: Starting Engine threads... 2009/02/15 10:38:27.062: Waiting for events from threads. 2009/02/15 10:41:44.687: Service shutdown requested. 2009/02/15 10:41:44.687: **** SERVICE SHUTTING DOWN!!! **** 2009/02/15 10:41:44.703: Closing handles... 2009/02/15 10:41:44.703: Unloading board dll... 2009/02/15 10:41:44.718: **** Service terminated. **** Engenic TeleFlow: Build 2008.6.26 (c) 1994 - 2008 Engenic All rights reserved. 2009/02/15 10:42:37.828: Checking Windows up-time. 2009/02/15 10:42:37.828: Windows up-time: 174610515 ms 2009/02/15 10:42:37.828: Windows has been running for at least 4 minutes 2009/02/15 10:42:37.828: TFSTART = 20090215104237 2009/02/15 10:42:37.828: Dynamically loading board DLL at run-time. 2009/02/15 10:42:37.828: LoadBoardFunctions: Start 2009/02/15 10:42:37.828: LoadBoardFunctions: Success. 2009/02/15 10:42:37.828: Board DLL: C:\Program Files\TeleFlow\brd_dialogic.dll 2009/02/15 10:42:37.828: Starting Monitor thread... 2009/02/15 10:42:37.843: Creating application manager 2009/02/15 10:42:37.843: Loading .TAL file into application list structure. 2009/02/15 10:42:37.843: WARNING: Failed to find TFKEY key in registry 2009/02/15 10:42:37.843: Running in evaluation mode 2009/02/15 10:42:37.843: This is an unlicensed or evaluation version of Teleflow. 2009/02/15 10:42:37.843: Port 1 is an unlicensed port 2009/02/15 10:42:37.843: Port 2 is an unlicensed port 2009/02/15 10:42:37.843: Port 3 is an unlicensed port 2009/02/15 10:42:37.843: Port 4 is an unlicensed port 2009/02/15 10:42:40.296: Starting Engine threads... 2009/02/15 10:42:40.296: Waiting for events from threads. 2009/02/15 10:46:54.062: Service shutdown requested. 2009/02/15 10:46:54.062: **** SERVICE SHUTTING DOWN!!! **** 2009/02/15 10:46:54.078: Closing handles... 2009/02/15 10:46:54.078: Unloading board dll... 2009/02/15 10:46:54.078: **** Service terminated. **** Engenic TeleFlow: Build 2008.6.26 (c) 1994 - 2008 Engenic All rights reserved. 2009/02/15 10:47:19.093: Checking Windows up-time. 2009/02/15 10:47:19.093: Windows up-time: 174891781 ms 2009/02/15 10:47:19.093: Windows has been running for at least 4 minutes 2009/02/15 10:47:19.093: TFSTART = 20090215104719 2009/02/15 10:47:19.093: Dynamically loading board DLL at run-time. 2009/02/15 10:47:19.093: LoadBoardFunctions: Start 2009/02/15 10:47:19.109: LoadBoardFunctions: Success. 2009/02/15 10:47:19.109: Board DLL: C:\Program Files\TeleFlow\brd_dialogic.dll 2009/02/15 10:47:19.109: Starting Monitor thread... 2009/02/15 10:47:19.125: Creating application manager 2009/02/15 10:47:19.125: Loading .TAL file into application list structure. 2009/02/15 10:47:19.125: WARNING: Failed to find TFKEY key in registry 2009/02/15 10:47:19.125: Running in evaluation mode 2009/02/15 10:47:19.125: This is an unlicensed or evaluation version of Teleflow. 2009/02/15 10:47:19.125: Port 1 is an unlicensed port 2009/02/15 10:47:19.140: Port 2 is an unlicensed port 2009/02/15 10:47:19.140: Port 3 is an unlicensed port 2009/02/15 10:47:19.140: Port 4 is an unlicensed port 2009/02/15 10:47:21.625: Starting Engine threads... 2009/02/15 10:47:21.625: Waiting for events from threads. 2009/02/15 10:48:14.453: Service shutdown requested. 2009/02/15 10:48:14.453: **** SERVICE SHUTTING DOWN!!! **** 2009/02/15 10:48:14.468: Closing handles... 2009/02/15 10:48:14.468: Unloading board dll... 2009/02/15 10:48:14.468: **** Service terminated. **** Engenic TeleFlow: Build 2008.6.26 (c) 1994 - 2008 Engenic All rights reserved. 2009/02/15 10:48:19.921: Checking Windows up-time. 2009/02/15 10:48:19.921: Windows up-time: 174952609 ms 2009/02/15 10:48:19.921: Windows has been running for at least 4 minutes 2009/02/15 10:48:19.921: TFSTART = 20090215104819 2009/02/15 10:48:19.921: Dynamically loading board DLL at run-time. 2009/02/15 10:48:19.921: LoadBoardFunctions: Start 2009/02/15 10:48:19.921: LoadBoardFunctions: Success. 2009/02/15 10:48:19.921: Board DLL: C:\Program Files\TeleFlow\brd_dialogic.dll 2009/02/15 10:48:19.921: Starting Monitor thread... 2009/02/15 10:48:19.937: Creating application manager 2009/02/15 10:48:19.937: Loading .TAL file into application list structure. 2009/02/15 10:48:19.937: WARNING: Failed to find TFKEY key in registry 2009/02/15 10:48:19.937: Running in evaluation mode 2009/02/15 10:48:19.937: This is an unlicensed or evaluation version of Teleflow. 2009/02/15 10:48:19.937: Port 1 is an unlicensed port 2009/02/15 10:48:19.937: Port 2 is an unlicensed port 2009/02/15 10:48:19.937: Port 3 is an unlicensed port 2009/02/15 10:48:19.937: Port 4 is an unlicensed port 2009/02/15 10:48:22.390: Starting Engine threads... 2009/02/15 10:48:22.390: Waiting for events from threads. Engenic TeleFlow: Build 2008.6.26 (c) 1994 - 2008 Engenic All rights reserved. 2009/02/15 11:10:50.734: Dynamically loading board DLL at run-time. 2009/02/15 11:10:50.734: LoadBoardFunctions: Start 2009/02/15 11:10:50.734: LoadBoardFunctions: Success. 2009/02/15 11:10:50.734: Board DLL: C:\Program Files\TeleFlow\brd_simulator.dll 2009/02/15 11:10:50.750: Creating application manager 2009/02/15 11:31:27.968: Service shutdown requested. 2009/02/15 11:31:27.968: **** SERVICE SHUTTING DOWN!!! **** 2009/02/15 11:31:27.984: Closing handles... 2009/02/15 11:31:27.984: Unloading board dll... 2009/02/15 11:31:27.984: **** Service terminated. **** Engenic TeleFlow: Build 2008.6.26 (c) 1994 - 2008 Engenic All rights reserved. 2009/02/15 11:31:58.453: Checking Windows up-time. 2009/02/15 11:31:58.453: Windows up-time: 177571140 ms 2009/02/15 11:31:58.453: Windows has been running for at least 4 minutes 2009/02/15 11:31:58.453: TFSTART = 20090215113158 2009/02/15 11:31:58.453: Dynamically loading board DLL at run-time. 2009/02/15 11:31:58.453: LoadBoardFunctions: Start 2009/02/15 11:31:58.453: LoadBoardFunctions: Success. 2009/02/15 11:31:58.453: Board DLL: C:\Program Files\TeleFlow\brd_dialogic.dll 2009/02/15 11:31:58.453: Starting Monitor thread... 2009/02/15 11:31:58.468: Creating application manager 2009/02/15 11:31:58.468: Loading .TAL file into application list structure. 2009/02/15 11:31:58.468: WARNING: Failed to find TFKEY key in registry 2009/02/15 11:31:58.468: Running in evaluation mode 2009/02/15 11:31:58.468: This is an unlicensed or evaluation version of Teleflow. 2009/02/15 11:31:58.468: Port 1 is an unlicensed port 2009/02/15 11:31:58.468: Port 2 is an unlicensed port 2009/02/15 11:31:58.468: Port 3 is an unlicensed port 2009/02/15 11:31:58.468: Port 4 is an unlicensed port 2009/02/15 11:32:00.921: Starting Engine threads... 2009/02/15 11:32:00.921: Waiting for events from threads. Thanks |
Author: | Tim [ Mon Feb 16, 2009 2:16 pm ] |
Post subject: | Re: Testing Application without simulator |
Did you stop the TeleFlow Server service when you booted the Dialogic card. TeleFlow should not be running while the card is starting. Have you told the Dialogic Configuration Manager to automatically start the card with Windows? Also, what hardware type do you have set in TeleFlow Config? Start -> Programs -> TeleFlow -> Server Tools -> TeleFlow Config. The "Telephony Hardware" type should be set to "Dialogic". |
Author: | Chris [ Mon Feb 16, 2009 3:35 pm ] |
Post subject: | Re: Testing Application without simulator |
To be 100% sure we are looking at the right information, and to ensure a clean start, and the smallest possible logs, please follow this Wiki to set up AnswerTest: Verifying Installation with AnswerTest NOTE:
* If you still have errors, you can supply the logs again. Send complete logs to support@engenic.com. The follow-up will be in this thread. (these complete logs should provide more to work with) |
Author: | hmarani [ Wed Feb 18, 2009 1:34 pm ] |
Post subject: | Re: Testing Application without simulator |
Chris, Thanks; that was Dialogic service update issue issue. Now all four ports are green. But when I call, a voice of Engenic comes that says I have to call Engenic then sounds like Fax (very annoying), is that normal? Thanks again Have a wonderful day. |
Author: | Chris [ Thu Feb 19, 2009 10:33 am ] |
Post subject: | Re: Testing Application without simulator |
The Engenic message is what plays when the software is unlicensed. Contact sales@engenic.com if you are interested in licensing the software. The sounds that are like a fax probably indicate that a Play step is using a file with the wrong audio format. TeleFlow's Dialogic support includes .vox files only. You will have to convert your .wav files to .vox. If you are using the TeleFlow Script Manager to manage your audio, you can use it to convert all of your audio for you. Firstly, on your main application page, you need to ensure your Settings indicate the "Application Voice Hardware" is set to "Intel / Dialogic". Then you can open the TeleFlow Script Manager, select "Tools" on the pull-down menu, and then select "Create & convert telephony voice files". After converting your files, try your tests again. |
Author: | hmarani [ Thu Feb 19, 2009 2:18 pm ] |
Post subject: | Re: Testing Application without simulator |
Chris, Thank for your help; now everything works without simulator except Text-To-Speech which works with simulator (demo) but not with live line? Is that the way supposed to be? Bests |
Author: | Tim [ Thu Feb 19, 2009 7:18 pm ] |
Post subject: | Re: Testing Application without simulator |
Firstly, running text-to-speech on telephony hardware requires that TeleFlow be licensed. If you don't yet have a license, contact sales@engenic.com to get one. Secondly, if your Dialogic card is in a different computer, it may be looking for the TTS server in the wrong place. For example, your desktop machine might have the TTS server installed on it and you are testing with the TFSimulator against 'localhost' or '127.0.0.1'. You may need to change the address for your Dialogic server to be able to reach your local computer (eg: '192.168.1.17'). You can find these settings in the Properties of the Speak Text step. |
Author: | hmarani [ Thu Feb 26, 2009 2:38 pm ] |
Post subject: | Re: Testing Application without simulator |
Tim, Thanks, excellent! hmarani |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |