| TeleFlow Forums http://teleflow.org/phpbb/ |
|
| Hardware and Server Details Needed To Run Application http://teleflow.org/phpbb/viewtopic.php?f=11&t=572 |
Page 1 of 1 |
| Author: | claudia [ Wed Feb 18, 2009 4:29 pm ] |
| Post subject: | Hardware and Server Details Needed To Run Application |
What harware we will need if want to run an application made using CT Developer Studio? Do we need to use windows 2000 Server? We need to answer 5 to 10 simultaneous calls, our application is for prepaid calling card airtime recarge. |
|
| Author: | Tim [ Thu Feb 19, 2009 12:25 pm ] |
| Post subject: | Re: Hardware and Server Details Needed To Run Application |
This Wiki entry will help: http://www.teleflow.org/wiki/index.php5?title=System_requirements The section that is most relevant to your question is #3 TeleFlow Standard Server. Windows 2000 Server would work great, although it is no longer available unless you have an old copy you can use. Windows 2003 Server will work fine too. Be sure *NOT* to get the 64-bit version. It must be the 32-bit version. You must make sure whatever physical computer you use has room in it for a full-length PCI-X card. The telephony card I would recommend you get is the Dialogic NMS AG 2000. It supports up to 8 simultaneous calls. You've indicated 5 to 10 simultaneous calls, so if 10 is your actual maximum, you will need two of these cards. If your real maximum is somewhere in the middle, this card will be ideal. Further, you can start with one card, and add a second later on, if need be. Just be sure your server computer has room for two full-length PCI-X cards. |
|
| Author: | claudia [ Thu Feb 19, 2009 1:13 pm ] |
| Post subject: | Re: Hardware and Server Details Needed To Run Application |
Than you. That was really helpfull. Can I star with a smaller card, maybe one that allws 4 simultaneous calls? Which one can I use? |
|
| Author: | Tim [ Thu Feb 19, 2009 7:29 pm ] |
| Post subject: | Re: Hardware and Server Details Needed To Run Application |
Before you do, check what type of computer you are going to be able to get. Finding one that hosts 2 full-length PCI-X cards is going to be a problem as it is. If budget is a concern, you will save money on increments of 4-port cards, and spend all your savings and then some on a wide-backplane PCI-X server. That aside, you can try one these models, also from Dialogic
D/41JCT-LS I hope that helps. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|