Problems with Teleflow 2005

inspot · **Joined:** Thu Jan 20, 2005 5:00 pm **Posts:** 1

I just installed an AG4000 and Teleflow 2005 on a new machine. This board worked perfectly on our existing machine which is using Teleflow2003 (plus updates). I used the same configuration to boot the AG4000 on the new machine and it appears to be booting fine. However, when I run teleflow (2005) the TFMonitor kicks up, and a fgew seconds later all lines go red. I have been unable to resolve this. There is currently no licence installed on this machine. The T1 line is currently not plugged into the board Could either of these be the problem. I will paste in the contents of one of the line log files, and the TFserver.log file. TFSERVER.LOG ------------ Jan 20 13:55:47.06: enGenic TeleFlow: Build 2004.1214 (c) 1994 - 2002 enGenic All rights reserved. Jan 20 13:55:47.06: Dynamically loading board DLL at run-time. Jan 20 13:55:47.06: LoadBoardFunctions: Start Jan 20 13:55:48.09: LoadBoardFunctions: Success. Jan 20 13:55:48.09: Board DLL: C:\Program Files\TeleFlow\brd_nms.dll Jan 20 13:55:48.09: Loading .TAL file into application list structure. Jan 20 13:55:48.09: This is an unlicensed or evaluation version of Teleflow. Jan 20 13:55:48.09: Port 1 is an unlicensed port Jan 20 13:55:48.09: Port 2 is an unlicensed port Jan 20 13:55:48.09: Port 3 is an unlicensed port Jan 20 13:55:48.09: Port 4 is an unlicensed port Jan 20 13:55:48.09: Port 5 is an unlicensed port Jan 20 13:55:48.09: Port 6 is an unlicensed port Jan 20 13:55:48.09: Port 7 is an unlicensed port Jan 20 13:55:48.09: Port 8 is an unlicensed port Jan 20 13:55:48.09: Port 9 is an unlicensed port Jan 20 13:55:48.09: Port 10 is an unlicensed port Jan 20 13:55:48.09: Port 11 is an unlicensed port Jan 20 13:55:48.09: Port 12 is an unlicensed port Jan 20 13:55:48.09: Port 13 is an unlicensed port Jan 20 13:55:48.09: Port 14 is an unlicensed port Jan 20 13:55:48.09: Port 15 is an unlicensed port Jan 20 13:55:48.09: Port 16 is an unlicensed port Jan 20 13:55:48.09: Port 17 is an unlicensed port Jan 20 13:55:48.09: Port 18 is an unlicensed port Jan 20 13:55:48.09: Port 19 is an unlicensed port Jan 20 13:55:48.09: Port 20 is an unlicensed port Jan 20 13:55:48.09: Port 21 is an unlicensed port Jan 20 13:55:48.09: Port 22 is an unlicensed port Jan 20 13:55:48.09: Port 23 is an unlicensed port Jan 20 13:55:48.09: Starting Monitor thread... Jan 20 13:55:48.09: Starting Engine threads... Jan 20 13:55:48.14: Waiting for events from threads. ANS01.LOG ---------- Jan 20 13:55:48.09: enGenic TeleFlow: Build 2004.1214 (c) 1994 - 2002 enGenic All rights reserved. Jan 20 13:55:48.09: Loading language 'C:\Program Files\TeleFlow\Lang_English.dll' Jan 20 13:55:48.09: Setting system variable '@SYSDRIVE' to 'C:' Jan 20 13:55:48.09: Setting system variable '@SYSDIR' to '\Get900' Jan 20 13:55:48.09: ERROR: Could not open file 'C:\Get900\GETNUMBER.TAP'. Jan 20 13:55:48.09: Setting system variable '@SYSDRIVE' to 'C:' Jan 20 13:55:48.09: Setting system variable '@SYSDIR' to '\Get900' Jan 20 13:55:48.09: Setting system variable '@P1' to '' Jan 20 13:55:48.09: Setting system variable '@P2' to '' Jan 20 13:55:48.09: Setting system variable '@P3' to '' Jan 20 13:55:48.09: Setting system variable '@P4' to '' Jan 20 13:55:48.09: Setting system variable '@P5' to '' Jan 20 13:55:48.09: Setting system variable '@P6' to '' Jan 20 13:55:48.09: Setting system variable '@P7' to '' Jan 20 13:55:48.09: Setting system variable '@P8' to '' Jan 20 13:55:48.09: Setting system variable '@P9' to '' Jan 20 13:55:48.09: Setting system variable '@PROMPT' to 'C:\Program Files\TeleFlow\Languages\English' Jan 20 13:55:48.09: Setting global variable '@VOLUME' to '0' Jan 20 13:55:48.09: Setting global variable '@TIMEOUT' to '3000' Jan 20 13:55:48.09: Setting global variable '@REC_TIME' to '0' Jan 20 13:55:48.09: Setting system variable '@FAXQPTR' to '' Jan 20 13:55:48.09: Setting system variable '@PORT' to '1' Jan 20 13:55:48.09: Setting system variable '@CALL_LINE' to '' Jan 20 13:55:48.09: Setting system variable '@SPELLTONES' to '' Jan 20 13:55:48.09: Setting system variable '@RECORD_RESULT' to '' Jan 20 13:55:48.09: Setting global variable '@SYS_DATA' to '' Jan 20 13:55:48.09: Setting system variable '@CHAR_SOH' to '' Jan 20 13:55:48.09: Setting system variable '@CHAR_STX' to '' Jan 20 13:55:48.09: Setting system variable '@CHAR_ETX' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_EOT' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_ENQ' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_ACK' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_BEL' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_BS' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_TAB' to ' ' Jan 20 13:55:48.10: Setting system variable '@TAB' to ' ' Jan 20 13:55:48.10: Setting system variable '@CHAR_LF' to ' ' Jan 20 13:55:48.10: Setting system variable '@LINEFEED' to ' ' Jan 20 13:55:48.10: Setting system variable '@CHAR_VT' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_FF' to '' Jan 20 13:55:48.10: Setting system variable '@FORMFEED' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_CR' to ' ' Jan 20 13:55:48.10: Setting system variable '@CHAR_SO' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_SI' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_DLE' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_DC1' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_DC2' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_DC3' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_DC4' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_NAK' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_SYN' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_ETB' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_CAN' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_EM' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_SUB' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_ESC' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_FS' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_GS' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_RS' to '' Jan 20 13:55:48.10: Setting system variable '@CHAR_US' to '' Jan 20 13:55:48.10: Setting system variable '@SPACE' to ' ' Jan 20 13:55:48.10: Setting system variable '@CHAR_DEL' to '' Jan 20 13:55:48.10: Setting system variable '@HANGUP' to '' Jan 20 13:55:48.14: Setting system variable '@FATAL' to '' Jan 20 13:55:48.14: Setting system variable '@CALL_SEIZED' to '' Jan 20 13:55:48.14: Setting system variable '@CALL_START' to '' Jan 20 13:55:48.14: Setting system variable '@CALL_END' to '' Jan 20 13:55:48.14: Setting system variable '@CALL_ELAPSE' to '' Jan 20 13:55:48.14: Setting system variable '@WEEKDAY' to '' Jan 20 13:55:48.14: Setting system variable '@DATE' to '' Jan 20 13:55:48.14: Setting system variable '@TIME' to '' Jan 20 13:55:48.14: Setting system variable '@HOOK_STATUS' to '' Jan 20 13:55:48.14: Setting system variable '@APPID' to '1001' Jan 20 13:55:48.14: Setting system variable '@CALLOUT_RESULT' to '' Jan 20 13:55:48.14: Setting system variable '@CALLOUT_REASON' to '' Jan 20 13:55:48.14: Opening driver... Jan 20 13:55:48.14: ctaSetErrorHandler true Jan 20 13:55:48.14: Initializing and opening the CTA context... Jan 20 13:55:48.14: Setting error handle: (0) CTA is not initialized. Jan 20 13:55:48.17: ctaInitialize: (0) SUCCESS Jan 20 13:55:48.20: Resetting error handle: (0) SUCCESS Jan 20 13:55:48.20: Daemon running. Using system process global default parms. Using trace setting defined in cta.cfg. Jan 20 13:55:48.20: Board event queue creation succeeded Jan 20 13:55:48.20: Board: 0 stream: 0 slot: 0 Jan 20 13:55:48.20: NMS Services: Jan 20 13:55:48.20: 0. ADI, ADIMGR, -2, 0:0, 0 Jan 20 13:55:48.20: Even

Chris · **Posted:** Thu Jan 20, 2005 6:17 pm

It appears it can't locate your TAP file, according to this line from the above log output: ERROR: Could not open file 'C:\Get900\GETNUMBER.TAP'. Double-check that the required TAP is in that location.