As far as I know, if NMS doesn't support R1 in your configuration, then TeleFlow can't support it either. You can try NFC-R2 as we have been using this in South AMerica. That protocol should be supported in countries other than South America and we have been having success using that. You will have to ask your telco to change the protocol to NFC-R2.

You can try using "wnk1" instead of "wnk0". You'll need to change it in the NMS board configuration file(s) as well as in the TeleFlow .TAL file. <br> <br>If that does not work, I am afraid I am out of ideas. NMS does not support R1. The following is a list of what they do support for Taiwan: <br> <br>Region Country Product Board Type Protocol <br>------ ------- ------- ---------- -------- <br>Asia/Pacific Taiwan AG-T1 Digital CAS Int'l Wink Start <br>Asia/Pacific Taiwan AG-T1 Digital ISDN <br>Asia/Pacific Taiwan AG 4000/1600-4T Digital ISDN <br>Asia/Pacific Taiwan AG 4000/3200-4T Digital ISDN <br>Asia/Pacific Taiwan AG 4000/4000-4T Digital ISDN <br>Asia/Pacific Taiwan AG 4000/4000-4T Digital ISDN <br>Asia/Pacific Taiwan CG 6100C Digital ISDN <br>Asia/Pacific Taiwan AG 4000C/3200-2T Digital ISDN <br>Asia/Pacific Taiwan AG 4000C/1600-4T Digital ISDN <br>Asia/Pacific Taiwan AG 4000C/3200-4T Digital ISDN <br>Asia/Pacific Taiwan AG 4000C/1600-2T Digital ISDN <br>Asia/Pacific Taiwan CG 6000C Digital ISDN <br> <br>As you can see, it's all about ISDN with some support for International Wink Start, which is why they suggested you try it. <br> <br>You can access this information at: <a href="http://www.nmscommunications.com/NMS/nmssweb.nsf/pages/GlobalApprovals " target="_new">http://www.nmscommunications.com/NMS/nmssweb.nsf/pages/GlobalApprovals </a><br> <br>Vern and/or Jim may be able to help you with this. NMS has a program to expand support and regulatory approvals. I copied both of them on this email.