Installing NMS CG6565 with NMS Natural Access 2005 software.
The Drivers fail to install. Below are the details of the NMS Commands.

C:\NMS\bin>pciscan
NMS PCI Boards Scanner

Bus Slot NMS ID
--- ---- ------
21 0 0x6568
--- ---- ------
There were 1 NMS PCI board(s) detected

C:\>oamcfg -q
No board(s) found in database.

C:\>oamcfg -x
Launch Board detection

DetectedBoards[] -- <empty array>

C:\>trunkmon
TRUNKMON Version 1.5 Jul 17 2007

Error in adiGetBoardInfo: CTAERR_INVALID_BOARD (0x1a).

oamcfg -s
Starting all boards.

Thu Mar 18 04:45:27 - OAMEVN_ALERT ERROR "cg6kpi.bpi"
Failed to open driver, error 2
Thu Mar 18 04:45:27 - CLKEVN_CONFIG_FAILED ERROR Board 0 "Name0"
CLKMGR.EMC: Board fail to Boot

Thu Mar 18 04:45:27 - OAMEVN_STARTBOARD_DONE OAM_REASON_FAILED ERROR Board 0 "Na
me0"
Failed to start board.

I have tried by reinstalling the NMS driver software but still issue Persists.

Any help Appreciated.

This forum is for TeleFlow developers using Dialogic Natural Access (formerly NMS) products. If you have questions about board configuration only, and it doesn't relate to an integration with TeleFlow, we would encourage to seek help from Dialogic. Start here:
http://www.dialogic.com/support/helpweb/nms/iw1907.aspx