TeleFlow Forums
http://teleflow.org/phpbb/

ops0 place call problem...
http://teleflow.org/phpbb/viewtopic.php?f=3&t=375		 Page 1 of 1
Author:  saugortgarcia [ Fri Jun 16, 2006 9:14 am ]
Post subject: 
Hi, we could adjust hookflash timming for transfer with ops-fx, ops0, on PBX side but we get this error when lunch a place call telling that 'NO_DIALTONE', how can we set in teleflow or nms to not expect dial tone? <br>Protocol: <br>ops0 <br>Teleflow log: <br>Jun 15 13:27:37.17: [15] Label <br>Jun 15 13:27:37.17: Label: BIENVENIDA_END <br>Jun 15 13:27:37.17: [2] FINISH <br>Jun 15 13:27:37.17: TEST<==Bienvenida <br>Jun 15 13:27:37.17: [12] Place Call <br>Jun 15 13:27:37.17: Place call to 100 <br> on the current connection using a flash hook length of 500 <br> and wait for up to 4 rings <br>Jun 15 13:27:37.17: Connect on CED <br>Jun 15 13:27:37.17: Do not connect on SIT <br>Jun 15 13:27:37.17: Event: ADIEVN_CP_DONE, Stopped <br>Jun 15 13:27:43.31: Event: NCCEVN_CALL_HELD <br>Jun 15 13:27:48.31: Event: NCCEVN_CALL_DISCONNECTED, NCC_DIS_NO_DIALTONE <br>Jun 15 13:27:48.31: Setting system variable '@CALLOUT_RESULT' to 'FAILURE' <br>Jun 15 13:27:48.31: Setting system variable '@CALLOUT_REASON' to 'NO_DIALTONE' <br>Jun 15 13:27:48.31: Event: NCCEVN_CALL_RELEASED <br>Jun 15 13:27:48.31: u-Event: NCCEVN_CALL_RELEASED <br>Jun 15 13:27:48.45: Event: NCCEVN_CALL_RETRIEVED <br>Jun 15 13:27:48.45: FAILURE <br>Jun 15 13:27:48.45: [16] Hang Up <br>Jun 15 13:27:48.45: Hanging up <br>Jun 15 13:27:48.46: Event: ADIEVN_CP_DONE, Released <br>Jun 15 13:27:48.46: Hanging up <br>Jun 15 13:27:48.46: Event: NCCEVN_CALL_RELEASED <br>Jun 15 13:27:48.46: u-Event: NCCEVN_CALL_RELEASED <br>Jun 15 13:27:48.46: Event: NCCEVN_STOP_PROTOCOL_DONE, CTA_REASON_FINISHED <br>Jun 15 13:27:48.46: Event: CTAEVN_DESTROY_CONTEXT_DONE, Finished <br>Jun 15 13:27:48.46: [2] FINISH <br>Jun 15 13:27:48.46: End of application.
Author:  Tim [ Fri Jun 16, 2006 9:39 am ]
Post subject: 
The new TeleFlow Hype (and Enterprise) has a revised Place Call step. Using the new TeleFlow, you should set your flash-hook duration to 0 (zero), or leave it empty. The NMS card will attempt to negotiate a "hold" of the existing, then place the 2nd call. <br> <br>Try setting your flash-hook to empty, and see what happens. Respond to this thread to let us know.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/