| TeleFlow Forums http://teleflow.org/phpbb/ |
|
| Nortel E1 lineside http://teleflow.org/phpbb/viewtopic.php?f=3&t=380 |
Page 1 of 1 |
| Author: | saugortgarcia [ Mon Jul 17, 2006 6:00 am ] |
| Post subject: | |
Hi, we are deploying a new Teleflow installation against a pbx Nortel with a NMS AG 4040. <br> <br>We have experience setting the NMS AG 4040 against ALCATEL A4400/OXE using lineside ,ops0, <br> <br>Do you have a guide or params that we have to watch out at the momment of connect Teleflow with the Nortel? <br> <br>Thanks |
|
| Author: | Tim [ Mon Jul 17, 2006 12:12 pm ] |
| Post subject: | |
You should be able to connect to a Nortel switch with the same, or almost the same, configuration as the Alcatel. If there is a difference between the Nortel and Alcatel configurations, it will likely be the "LineCode" setting, or possibly the "FrameType" setting (although my understanding is that all E1 circuits use HDB3). <br> <br>Here is a sample AG 4040 board configuration file, if you need it: <a href="http://www.engenic.com/temp/_ag_4040_E1_ops.cfg" target="_new">_ag_4040_E1_ops.cfg</a> <br> <br>Note also that in your Teleflow Line List file, you have to set the protocol setting to "ops0" for each line. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|