|
Hi, we could adjust hookflash timming for transfer with ops-fx, ops0, on PBX side but we get this error when lunch a place call telling that 'NO_DIALTONE', how can we set in teleflow or nms to not expect dial tone?
<br>Protocol:
<br>ops0
<br>Teleflow log:
<br>Jun 15 13:27:37.17: [15] Label
<br>Jun 15 13:27:37.17: Label: BIENVENIDA_END
<br>Jun 15 13:27:37.17: [2] FINISH
<br>Jun 15 13:27:37.17: TEST<==Bienvenida
<br>Jun 15 13:27:37.17: [12] Place Call
<br>Jun 15 13:27:37.17: Place call to 100
<br> on the current connection using a flash hook length of 500
<br> and wait for up to 4 rings
<br>Jun 15 13:27:37.17: Connect on CED
<br>Jun 15 13:27:37.17: Do not connect on SIT
<br>Jun 15 13:27:37.17: Event: ADIEVN_CP_DONE, Stopped
<br>Jun 15 13:27:43.31: Event: NCCEVN_CALL_HELD
<br>Jun 15 13:27:48.31: Event: NCCEVN_CALL_DISCONNECTED, NCC_DIS_NO_DIALTONE
<br>Jun 15 13:27:48.31: Setting system variable '@CALLOUT_RESULT' to 'FAILURE'
<br>Jun 15 13:27:48.31: Setting system variable '@CALLOUT_REASON' to 'NO_DIALTONE'
<br>Jun 15 13:27:48.31: Event: NCCEVN_CALL_RELEASED
<br>Jun 15 13:27:48.31: u-Event: NCCEVN_CALL_RELEASED
<br>Jun 15 13:27:48.45: Event: NCCEVN_CALL_RETRIEVED
<br>Jun 15 13:27:48.45: FAILURE
<br>Jun 15 13:27:48.45: [16] Hang Up
<br>Jun 15 13:27:48.45: Hanging up
<br>Jun 15 13:27:48.46: Event: ADIEVN_CP_DONE, Released
<br>Jun 15 13:27:48.46: Hanging up
<br>Jun 15 13:27:48.46: Event: NCCEVN_CALL_RELEASED
<br>Jun 15 13:27:48.46: u-Event: NCCEVN_CALL_RELEASED
<br>Jun 15 13:27:48.46: Event: NCCEVN_STOP_PROTOCOL_DONE, CTA_REASON_FINISHED
<br>Jun 15 13:27:48.46: Event: CTAEVN_DESTROY_CONTEXT_DONE, Finished
<br>Jun 15 13:27:48.46: [2] FINISH
<br>Jun 15 13:27:48.46: End of application.
|
