Hi, we are deploying a new Teleflow installation against a pbx Nortel with a NMS AG 4040. <br> <br>We have experience setting the NMS AG 4040 against ALCATEL A4400/OXE using lineside ,ops0, <br> <br>Do you have a guide or params that we have to watch out at the momment of connect Teleflow with the Nortel? <br> <br>Thanks

You should be able to connect to a Nortel switch with the same, or almost the same, configuration as the Alcatel. If there is a difference between the Nortel and Alcatel configurations, it will likely be the "LineCode" setting, or possibly the "FrameType" setting (although my understanding is that all E1 circuits use HDB3). <br> <br>Here is a sample AG 4040 board configuration file, if you need it: <a href="http://www.engenic.com/temp/_ag_4040_E1_ops.cfg" target="_new">_ag_4040_E1_ops.cfg</a> <br> <br>Note also that in your Teleflow Line List file, you have to set the protocol setting to "ops0" for each line.