Post new topic Reply to topic  [ 4 posts ] 

Board index : TeleFlow Forums : NMS Communication Boards

Author Message
 Post subject:
PostPosted: Tue Oct 17, 2006 3:29 pm 
Offline

Joined: Fri Jul 02, 2004 2:56 pm
Posts: 21
Location: USA
I am using an AG4000 board, NMS 2005 SP2 drivers, with Teleflow 2006 (downloaded on 2006-09-14. <br> <br>Answering calls is happenning slowy - I belive this is because the DNIS information is not arriving (the @DNIS variable in call logs consistently shows the single digit 3). <br> <br>Is there a way I can configure the NMS board/Teleflow to ignore the DNIS information arrival so it will pick-up immediately?


Back to top
 Profile WWW 
 
 Post subject:
PostPosted: Tue Oct 17, 2006 6:09 pm 
Offline
Site Admin

Joined: Wed Dec 31, 1969 5:00 pm
Posts: 329
Location: Vancouver, BC
Hmm... this does not make any sense. You should be at receiving least 3 digits at the start of the call. Otherwise, there is not enough information to determine the dialed number (DNIS), and therefore what service to answer with. Some questions come to mind... <br> <br>Do you know how many digits your service provider is configured to send to you? <br> <br>Can you scan forward in the log and see if any other digits show up in your application? <br> <br>What is the exact TeleFlow build number? You should be able to find it at the top of any TeleFlow log, or the most recent TFServer*.log file. <br> <br>If you were to disable the DNIS retrieval on the TeleFlow side, you'd end up with a touch-tone 3 showing up in your application. I guess you could trap if, but I personally do not think this is a desired solution. If the circuit is truly sending you a single digit DNIS, then you would want to set the number of digits received to 1.


Back to top
 Profile WWW 
 
 Post subject:
PostPosted: Wed Oct 18, 2006 8:55 am 
Offline

Joined: Fri Jul 02, 2004 2:56 pm
Posts: 21
Location: USA
OK -- it looks like we are only getting one digit of DNIS information (I put a Get TT step - 5 second time - straight after the wait for call and it got nothing, and only the single digit 3 was put in my @DNIS variable configured in the "Wait for Call" step). <br> <br>The Teleflow version number is "enGenic TeleFlow: Build 2006.0912" <br> <br>Would an option be to disable the get DNIS information and have a "Clear TT" step before my Teleflow application executes its first "Get TT" step? This would also cover if the provider gave more than one DNIS digit.


Back to top
 Profile WWW 
 
 Post subject:
PostPosted: Fri Oct 20, 2006 12:06 pm 
Offline
Site Admin

Joined: Wed Dec 31, 1969 5:00 pm
Posts: 329
Location: Vancouver, BC
The build you have is hard-coded to expect 4 digits of DNIS. Your fastest route to a solution here is to get the service provider to send you 4 digits. One digit is just plain weird, and I can't imagine why they would do that. It sounds like a mistake on their part to me. <br> <br>Long term, I want to give you the opportunity to set your own # of digits. I don't know if we will be able to disable DNIS collection, but we will look into that as well. I can't provide a date at this point in time, but I can assure you someone will look at this next week. <br> <br>In this case, disabling the DNIS is probably not the best solution. If you can't get the provider to change their digit sending, then you should set your expected number of digits to 1. You will of course, need a TeleFlow update from us first.


Back to top
 Profile WWW 
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

Board index : TeleFlow Forums : NMS Communication Boards


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Style by Midnight Phoenix & N.Design Studio
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.