Really, the best way to test the lines is to run the TeleFlow Application "AnswerTest.TAP" (search the TeleFlow directory to find it) on all ports. If every port reaches the "Wait for Call" step, and remains waiting for a call, that is a good start. Then, just call the system to see if it is set up properly. This will only work on your digital trucks if you are using ISDN. Typically, you will need to work with your Telco to first ensure that you have a "clean" ISDN circuit running. Then, move on to testing TeleFlow against it.
<br>
<br>As for disabling ports: When building your TAL file, just set it to not run the ports that you want to disable. Note that TeleFlow numbers ports as 1 to 24. (not 0-23)
|