Example for config MNS card supported VOIP

tuanhuynh · **Joined:** Tue May 01, 2007 7:17 pm **Posts:** 3

Hi all,
I know that teleFlow Enterprise supports VOIP services on the NMS CG 6060 card. Please, give me an example for configuration the MNS card to work with VOIP.
Thanks so much.
tuanhuynh

fesquivel · **Posted:** Thu Mar 24, 2011 1:07 pm

I'm curious about this too... Is there an example we can study on how to configure and use the NMS CG6060 as a SIP-compatible board for IVRs?

Tim · **Posted:** Thu May 26, 2011 5:20 pm

Here's a couple of samples. Download the attachment and extract them from the .zip file.

CG6060_fusion_PRI.cfg
A sample of a fusion configuration with one PRI and SIP

CG6060_VoIP_only.cfg
A sample of a fusion configuration with the entire board used for VoIP/SIP and no telephony trunk interfaces defined.

Note that in order to use these, you must have SIP for Natural Access installed and licensed. There is a demonstration license that comes with SIP for Natural Access that you can use for up to 30 days.