TeleFlow Step 0019

From TeleFlow

Revision as of 02:54, 16 May 2008 (edit) Wikilib (Talk | contribs) (New page: Image:Iv_019.gif <strong><big>Disable Reorder Step</big></strong><br> Disables reorder tone detection on the current port. See Enable Reorder for more information.<br> <br> ===Properti...) ← Previous diff		Current revision (02:55, 16 May 2008) (edit) (undo) Wikilib (Talk | contribs)
Line 1:		Line 1:
-	[[Image:Iv_019.gif]] <strong><big>Disable Reorder Step</big></strong><br>	+	[[Image:Iv_019.gif]] <strong><big>Enable Reorder</big></strong><br>
-	Disables reorder tone detection on the current port. See Enable Reorder for more information.<br>	+	Enables reorder tone detection on the current port. On analog lines (only), a caller hanging up is detected automatically based on voltage changes. In many analog systems, these voltage changes do not occur, but reorder tones are generated on the line. Using this step and enables TeleFlow to hang up when these tones are detected. The application must first use the [[TeleFlow_Step_0019|Set Reorder Tone step]] to configure the tone frequencies and cadence. The frequencies and cadence are generally based on the area of the world the application is run in.<br>
	<br>		<br>
	===Properties===		===Properties===

---

Current revision

Enable Reorder
Enables reorder tone detection on the current port. On analog lines (only), a caller hanging up is detected automatically based on voltage changes. In many analog systems, these voltage changes do not occur, but reorder tones are generated on the line. Using this step and enables TeleFlow to hang up when these tones are detected. The application must first use the Set Reorder Tone step to configure the tone frequencies and cadence. The frequencies and cadence are generally based on the area of the world the application is run in.

Properties

None (affects the current port automatically)

Action Steps

None.

Supported Telephony Hardware Platforms

AudioCodes (Ai-Logix)
Dialogic